Adhesives, grouts, sealers & cleaners

"A Natural stone floor is forever"

This is only true when suitable and reliable products are used during installation. This is why Shaw Stone offers this range of specially selected accessories. They have all been tested on natural stone floor tiles and have been proved for their cost effective qualities. We unreservedly guarantee these products when they are used correctly.   

!

Beltramix

!

When installing a natural stone, especially slate and quartzite (great adhesion) and pale marbles (stain prevention), we recommend coating the backs of tiles with Beltramix. Beltramix is also an ideal additive for mortars to attain greater mechanical strength, more flexibility and minimal shrinkage.

 

Advantages

 

  • For internal and external use
  • Non-flammable
  • Ease of application
  • Thin liquid mixes easily
  • Solvent free
  • No deterioration
  • Multi-purpose applications.  

 

 

Beltraflex

!

This flexible adhesive can be used with any kind of natural stone, calibrated or non-calibrated, for compensating differences in the concrete floor or screed and variation in tile thickness.

Minimum thickness of adhesive layer: 5mm

Maximum thickness of adhesive layer: 15mm

Coverage: Minimum 4kg per m2

 

Advantages

 

  • For internal and external use
  • Flexible
  • Suitable for any type of natural stone
  • Fast drying
  • High final bond
  • No deterioration
  • Easy to apply
  • After 24 hours the floor can be walked on; after 7 days floor can be loaded.

BeltraJoint

!

The mortar is suitable for both internal and external use and for a joint width of up to 1cm. The joint width is usually 3 to 4mm. With slate, quartzite, sandstone and antiqued limestone (e.g. Roman pavement rustico finish) the joint will be wider (5 to 10mm). Please ask us if in doubt. During grouting the tiles must be repeatedly cleaned to avoid build up of a cement film.

Lithofin MN Power Cleaner

!
Larger picture 

An alkaline cleaner that dissolves and removes oil and grease marks, waxes, gloss films and residues from other floor care products and general soiling. Also for the removal of light cement films during and after grouting. For use on all marbles, polished and unpolished natural and artificial stone.

Lithofin MN Stain Stop

!
Larger picture 

A spirit based, silicone impregnator that penetrates into the surface of stone and forms an invisible film within the pores and capillaries.

Prevents staining from water, dirt and oil, allowing the stone to breathe, and aids maintenance. For use on all polished and unpolished natural and artificial stone.

Lithofin Stainstop W

!
Larger picture 

A water based impregnator that penetrates into the surface of stone and forms an invisible film on the capillaries to prevent staining from water, dirt and oil, allowing the stone to breathe and aiding maintenance. For use on all natural and artificial stone surfaces, unglazed ceramics and terracotta.



Lithofin Slate Seal

!
Larger picture 

A solvent based acrylate sealant that produces a high sheen finish, whilst intensifying and protecting the colours and aids maintenance on riven / rough multi-coloured slate.


Lithofin Easy-Care

!
Larger picture 

For the regular cleaning, care and maintenance of all terracottas, sandstones, slates, ceramic tiles, natural and artificial stone and terazzo.

As a guide, approximately 1 litre will clean a 50 square meter floor for a month. So, for a 25 square meter floor 1 litre should last 2 months...